The Inkle Loom, A Dragon Tail

I have no idea what has happened to Blogger but over the last few months gaining access has become impossible, not just for me/us but searching the net for clues seems many could not get past signing in. I seem to have got in at long last.

This post is "A Dragon's Tail" about a desire for an Inkle Loom by Judit Smorti one of Ipswich Spinners and friend of Sue's. Judith is an artist of many ilkes, who had borrowed a typical Inkle Loom photo on right.

An Inkle Loom is an odd looking thing, it dates back long before Vikings. Yet it's use has changed little in all this time, just some of what it produces has been expanded on.


Judith had her own ideals set on something out of the ordinary for herself. Together we searched the net gaining ideas as we went but not quite what Judith was after.

Below are some of those images of looms we came across.

I finally came up with something I hope she gets years of enjoyment from. Judith having seen the Dragon ones above stated she is a dragon person. I again scoured for images of dragons, dragon drawings, sketches, only one came close but I had to alter it a great deal. I'm no artist when it comes to drawing from scratch. Using elements from the original and my design of the body of the loom this image below was the first I emailed to Judith. It met with a resounding "I love it" thats it!!
A few more modifications and a large print out was done. Then came the wait as officeworks was on the move over a period of months and were closed. We finally got to the new store and the lovely lady  took care and attention to my request for 4 copies 2 each of different sizes.

 Positioning of pegs was crucial as was the overall size of the Dragon to maximise weave length but make it versatile to shorten it if need be by missing out on using pegs. Placement of heddle peg as well as an adjustment tension peg.

Choice of timber left to me, my first thoughts were camphor but some other interesting grained timbers came into play from time to time while searching for the right piece.
I'd spoken to Steve Hay "Woodworking Masterclass" who had some real nice Beefwood but this would have required jointing. It may have caused bigger problems due to size and shape required.





Maleny Wood Show was coming closer May 2017, Sue and I headed up on day one, early as we could arriving by about 9.30am. Our mission to locate and buy the right piece, hoping it would jump out at us. From one end to the other we walked/rolled and walked some more checking out as much as we could (this was tough going, I had to curb my own interests). Nothing could we find suitable either size, grain or colour although a number came close. Come 2.30 we'd had enough empty handed (other than plants Sue had bought), to the car we headed.

Sue said as we past by stalls now low in wood stock (note the pun) we might just find something, I doubted it we'd checked and re-checked. Then out of the corner of Sue's eye she spotted just as we were passing site 92 Beenatree Milling yet again, Sue walked over and pulled out a crotch of Camphor. The guy said he'd not long dug it out from behind some timber he'd moved to restock the stall as best he could.
Out cam the tape measure it sure looked the part faults and all and was just within size with inches to spare. Thus ended the day now with elated hearts, can't say I've ever been to a woodshow without buying something for myself. Ok so I got two Cedar Turning blanks of Stan in swap for chilli seeds.














Days were spent orientating which way round the Dragon would be best suited to be cut from. A plywood template made, even that had alterations drawn and marked on it.
The peg holes were drilled in the template 1/8" enough to screw holding screws through and mark out adding a further 60mm to the bottom edge. Then came the rough cut leaving ample room all round.


 At first on the PC as can be seen below, positioning and re-positioning. Then again on the slab itself.

Chalking lines removing the template rubbing out again and again for best result.
At last marker pen lines for the 2nd series of bandsaw cuts.

Hand planing flat, filling voids with epoxy and CA, more planing and sanding, till finally using the router tracing round the template which was screwed into position, the the stage below.

Ok time to make more swifts, loom repairs, garage shelving installation, supervising Dan the Handy Man, a trip to Sydney, Christmas, weather to hot to do much at 40C+. See numerous previous posts.

I'm so glad Judith wasn't in any hurry.

Back to it drilling peg holes, shaping, making tool handles for rasp's and a bow sander (see previous posts).
Buying material for pegs to be made from, no pine used here hardwood hoe or garden rake handle's, all turned down to 19mm x 40mmL section and rounded true and sanded along the remained x 12. All finished with Danish Oil.

Routing edges and shaping using coping saw, and Dremel and files an occasional chisel (one day I'll buy a carving chisel set).

The Dragon was starting to take shape eye sockets had been formed, now what to use as eyes.?? I purchased three different acrylic pen blanks choosing the best of the lot. Shaping them and fitting them temporarily, panic set in when one went missing.

Yes still rough round the edges etc, but shaping up. You know when something just doesn't look or feel right, so it was with Dragon. See if you notice in the final photos.

Above is dry fit stage, working out warp length etc.

Sideline yet again, this time due to re-occuring shoulder injury, a flu and a broncial/lung infection the latter I hadn't had since mid 20's.

Slowly does it during recovery, making the foot blocks, drilling and fitting those using Chicago screws and inserts.  

 Liberal coats of Danish Oil hand sanding and hand buffing with days of air drying.
Make new adjustment peg and knob.

 

 

More wet sanding drying time and buffing, glue in the pegs and eyes, assemble feet and done

Judith came round to pick it up.

I asked if she could make me a new camera strap when she had time.

Jude says she and Dragon are inkling well together, in its first ever warp.

I learned a lot from this project being the last time I carved anything was Lino Carving at primary school. Years of shaping bog on body repairs helped some tho.

Camphor Laurel, approx size 650Lx450Hx43mm thick.

A stand for the dragon to sit on will be made so additional post some time down the track to come.

Almost forgot some Shuttles made also to compliment it.

The Year Marches On

Christmas & New Year long gone Easter almost here, summer has stretched thus far into March 13th 2019. It is still reaching 35C to 42C with little rain since December. Garden's and lawn suffering badly although some seem to be doing well with the watering they get. Vegetable garden has been stripped by Sue to minimum as the heat has cooked the plants and earth.


My special project is coming along very slowly but getting there.

I've had a few visitors and cut up timbers for the three of them. Osage Orange and Burls mainly to use as what's known as scales or knife handles. The first round were all quarter cut leaving the grain looking much like the block face on the left and two photos below left & right.
I convinced Marcus on the second round to allow me to cut it across the grain producing like the middle photo. I scored a few decent bowl blanks size and the pile of of cuts in the photo to the right.

Marcus left me with four very nice blanks I have no idea of the timbers.

Ted left me with some beautiful Deer Antler.










While Luke gave me an incredible grain overload of burl.

Eric our neighbour introduced me to Paul who makes model boats, they called in twice showing off three of Paul's handy work. Listening to Paul tell his tale and history of the boats fascinated me. The Abalone trawler Mavis he worked on as a young man in Tasmania diving in a Bell suit and the cold waters off the south east coast.
The boat sank off St Helens, Paul made the model purely from memory.
The other two were designed by himself to scale, motors in all, the last one not quite completed as yet.
All work is done by Paul using Baltic Pine for the whole structure, lights made from Brass as well as hand rails silver soldered, motors are 12V.

This is Mavis the Abalone boat.








Below the second completed vessel although Paul needs to make a new cover for the engine compartment the temp one shown here.

This is the incomplete trawler fully designed by Paul. The prop was cast in the UK designed by Paul.






Sue had a Spinners group task to take on as well as some of the other ladies. The group having been around for 40+ years had often had a weekend camp, where they had a special table cloth which was lace. It had become worn in places, so it was cut up and pieces handed out. Sue made these Pin Cushions Elephant's, Scotty and a Sausage Dog.

I'd been given two lots of timber a quarter sawn log of Budgeroo which I cut a 100mm piece off to see better the various grain etc. Darn bandsaw bladed needed a sharpen didn't it.

I've been wanting to make a cyclone for the dust extractor long before upgrading a friend of a friend used his full sized wheelie bin by adding a simple plywood board with 100mm pipes and some door sealer. Thanks Alan & Peter. Mine is much smaller of a wheelie bin Sue picked up at a discount store (not cheap) but it will suit my needs. The drain waste gate fitted to stop anything going into the dusty.


I've joined a group it is relatively new Queensland Metal Artisans Collective or QMAC for short. You will find them on Facebook where all the latest happenings get posted. Blacksmith is the main ideal with some very talented members across many areas.  A few photos I've taken.